XU Dong,CAO Ye,ZHAO Ai-hong,TONG Zheng-rong.A microwave photonic filter based on multi-wavelength fiber laser and infinite impulse response[J].Optoelectronics Letters,2016,12(5):325-328 A microwave photonic filter based on multi-wavelength fiber laser and infinite impulse response Author Name Affiliation XU Dong  Communication Devices and Technology Engineering Research Center, School of Computer and Communication Engineering, Tianjin University of Technology, Tianjin 300384, China  CAO Ye  School of Electronic and Information Engineering, Qingdao University, Qingdao 266071, China  ZHAO Ai-hong  Communication Devices and Technology Engineering Research Center, School of Computer and Communication Engineering, Tianjin University of Technology, Tianjin 300384, China  TONG Zheng-rong  Communication Devices and Technology Engineering Research Center, School of Computer and Communication Engineering, Tianjin University of Technology, Tianjin 300384, China  Abstract:       A microwave photonic filter (MPF) based on multi-wavelength fiber laser and infinite impulse response (IIR) is proposed. The filter uses a multi-wavelength fiber laser as the light source, two sections of polarization maintaining fiber (PMF) and three polarization controllers (PCs) as the laser frequency selection device. By adjusting the PC to change the effective length of the PMF, the laser can obtain three wavelength spacings, which are 0.44 nm, 0.78 nm and 1.08 nm, respectively. And the corresponding free spectral ranges (FSRs) are 8.46 GHz, 4.66 GHz and 3.44 GHz, respectively. Thus changing the wavelength spacing of the laser can make the FSR variable. An IIR filter is introduced based on a finite impulse response (FIR) filter. Then the 3-dB bandwidth of the MPF is reduced, and the main side-lobe suppression ratio (MSSR) is increased. By adjusting the gain of the radio frequency (RF) signal amplifier, the frequency response of the filter can be enhanced. Hits: 3934 Download times: 0 View Full Text    Download reader